Move the 32-bit compatible procfs types from freebsd32.h to <sys/procfs.h>
and export them to userland.
- Define __HAVE_REG32 on platforms that define a reg32 structure and check
for this in <sys/procfs.h> to control when to export prstatus32, etc.
- Add prstatus32_t and prpsinfo32_t typedefs for the 32-bit structures.
libbfd looks for these types, and having them fixes 'gcore' in gdb of a
32-bit process on a 64-bit platform.
- Use the structure definitions from <sys/procfs.h> in gcore's elf32 core
dump code instead of duplicating the definitions.
Create 32-bit core files for 32-bit processes on 64-bit machines.
The 64-bit machine supported right now is amd64, but it's not too
hard to add powerpc64.
Try alternate addresses more agressively.
PR: 158125
Submitted by: Mark Andrews <marka isc org> (with changes from me)
whois: code cleanup
Use pedantically correct types.
whois: do not clobber command-line flags when tweaking O_NONBLOCK
This can make whois fail to follow referrals when it should.
The bug was introduced in r281959.
r282468, r282609
Update the list of known roff commands (both from NetBSD and heirloom doctools)
Improve memory checking
Remove limitation on input lines by using getline(3)
r282305:
col: fixing 25 year old bug
Makes col(1) respect POSIX again for escape sequences as decribed in its manpage
The bug was introduced in CSRG in 1990
r282309:
Use defines to improve clarity
r282342:
Capsicumize col(1)
r282669:
Fix about ten integer overflows and underflows and a handful of logic
errors in line number handling.
Submitted by: schwarze at OpenBSD
Discussed with: schwarze at OpenBSD
Obtained from: OpenBSD
r282722:
For half and reverse line feeds, recognize both SUSv2-style escape-digit
and BSD-style escape-control-char sequences in the input stream.
Submitted by: schwarze at OpenBSD
Discussed with: schwarze at OpenBSD
Obtained from: OpenBSD
Set ARCHIVE_EXTRACT_SECURE_SYMLINKS and ARCHIVE_EXTRACT_SECURE_NODOTDOT
as in bsdtar to prevent extraction of archive entries whose pathnames
contain .. or whose target directory would be altered by a symlink.
Also disallow absolute pathnames.
We don't currently provide an option to disable this behaviour (as
bsdtar's -P does). It is unlikely to be a problem in practice for ar(1),
but the -P option is not currently used and available if we want to
consider it for this purpose.
Obtained from: ELF tool chain ar, Ticket #474
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Add the flowtype to the inpcb.
Add -R to netstat to dump RSS/flow information.
Reviewed by: delphij
Relnotes: yes (for r266448)
Sponsored by: Limelight Networks
- Clarify usage of the -f option.
MFC r280336:
Describe the behavior when both -f and a message are given. Pointed out by
Raphael Abreu <raphael.lorenzeto@gmail.com> on freebsd-doc.
Include OBJT_PHYS VM objects in ELF core dumps. In particular this
includes the shared page allowing debuggers to use the signal trampoline
code to identify signal frames in core dumps.
This includes these changes: 279219, 279229, 279261, 279534, 279570,
280230, 280231.
In addition, bump __FreeBSD_version for the addition of the new
mtio(4) / sa(4) ioctls.
Thanks to Dan Langille, Harald Schmalzbauer and Rudolf Cejka for spending
a significant amount of time and effort testing these changes.
------------------------------------------------------------------------
r279219 | ken | 2015-02-23 14:59:30 -0700 (Mon, 23 Feb 2015) | 282 lines
Significant upgrades to sa(4) and mt(1).
The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.
Significant changes and new features include:
o sa(4) driver status and parameter information is now exported via an
XML structure. This will allow for changes and improvements later
on that will not break userland applications. The old MTIOCGET
status ioctl remains, so applications using the existing interface
will not break.
o 'mt status' now reports drive-reported tape position information
as well as the previously available calculated tape position
information. These numbers will be different at times, because
the drive-reported block numbers are relative to BOP (Beginning
of Partition), but the block numbers calculated previously via
sa(4) (and still provided) are relative to the last filemark.
Both numbers are now provided. 'mt status' now also shows the
drive INQUIRY information, serial number and any position flags
(BOP, EOT, etc.) provided with the tape position information.
'mt status -v' adds information on the maximum possible I/O size,
and the underlying values used to calculate it.
o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.
The extra devices were originally added as place holders for
density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap
and Solaris) have had device nodes that, when you write to them,
will automatically select a given density for particular tape drives.
This is a convenient way of switching densities, but it was never
implemented in FreeBSD. Only the device nodes were there, and that
sometimes confused users.
For modern tape devices, the density is generally not selectable
(e.g. with LTO) or defaults to the highest availble density when
the tape is rewritten from BOT (e.g. TS11X0). So, for most users,
density selection won't be necessary. If they do need to select
the density, it is easy enough to use 'mt density' to change it.
o Protection information is now supported. This is either a
Reed-Solomon CRC or CRC32 that is included at the end of each block
read and written. On write, the tape drive verifies the CRC, and
on read, the tape drive provides a CRC for the userland application
to verify.
o New, extensible tape driver parameter get/set interface.
o Density reporting information. For drives that support it,
'mt getdensity' will show detailed information on what formats the
tape drive supports, and what formats the tape drive supports.
o Some mt(1) functionality moved into a new mt(3) library so that
external applications can reuse the code.
o The new mt(3) library includes helper routines to aid in parsing
the XML output of the sa(4) driver, and build a tree of driver
metadata.
o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
(write filemark immediate) ioctls needed by IBM's LTFS
implementation.
o Improve device departure behavior for the sa(4) driver. The previous
implementation led to hangs when the device was open.
o This has been tested on the following types of drives:
IBM TS1150
IBM TS1140
IBM LTO-6
IBM LTO-5
HP LTO-2
Seagate DDS-4
Quantum DLT-4000
Exabyte 8505
Sony DDS-2
contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
Add libmt.
lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
New mt(3) library that contains functions moved from mt(1) and
new functions needed to interact with the updated sa(4) driver.
This includes XML parser helper functions that application writers
can use when writing code to query tape parameters.
rescue/rescue/Makefile:
Add -lmt to CRUNCH_LIBS.
src/share/man/man4/mtio.4
Clarify this man page a bit, and since it contains what is
essentially the mtio.h header file, add new ioctls and structure
definitions from mtio.h.
src/share/man/man4/sa.4
Update BUGS and maintainer section.
sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
functions.
sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
Many tape driver changes, largely outlined above.
Increase the sa(4) driver read/write timeout from 4 to 32
minutes. This is based on the recommended values for IBM LTO
5/6 drives. This may also avoid timeouts for other tape
hardware that can take a long time to do retries and error
recovery. Longer term, a better way to handle this is to ask
the drive for recommended timeout values using the REPORT
SUPPORTED OPCODES command. Modern IBM and Oracle tape drives
at least support that command, and it would allow for more
accurate timeout values.
Add XML status generation. This is done with a series of
macros to eliminate as much duplicate code as possible. The
new XML-based status values are reported through the new
MTIOCEXTGET ioctl.
Add XML driver parameter reporting, using the new MTIOCPARAMGET
ioctl.
Add a new driver parameter setting interface, using the new
MTIOCPARAMSET and MTIOCSETLIST ioctls.
Add a new MTIOCRBLIM ioctl to get block limits information.
Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
and scsi_read_position_10().
scsi_locate_10 implements the LOCATE command, as does the
existing scsi_set_position() command. It just supports
additional arguments and features. If/when we figure out a
good way to provide backward compatibility for older
applications using the old function API, we can just revamp
scsi_set_position(). The same goes for
scsi_read_position_10() and the existing scsi_read_position()
function.
Revamp sasetpos() to take the new mtlocate structure as an
argument. It now will use either scsi_locate_10() or
scsi_locate_16(), depending upon the arguments the user
supplies. As before, once we change position we don't have a
clear idea of what the current logical position of the tape
drive is.
For tape drives that support long form position data, we
read the current position and store that for later reporting
after changing the position. This should help applications
like Bacula speed tape access under FreeBSD once they are
modified to support the new ioctls.
Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
drives that report SCSI-2 or older, as well as drives that
report an Illegal Request type error for READ POSITION with
the long format. So we should automatically detect drives
that don't support the long form and stop asking for it after
an initial try.
Add a partition number to the sa(4) softc.
Improve device departure handling. The previous implementation
led to hangs when the device was open.
If an application had the sa(4) driver open, and attempted to
close it after it went away, the cam_periph_release() call in
saclose() would cause the periph to get destroyed because that
was the last reference to it. Because destroy_dev() was
called from the sa(4) driver's cleanup routine (sacleanup()),
and would block waiting for the close to happen, a deadlock
would result.
So instead of calling destroy_dev() from the cleanup routine,
call destroy_dev_sched_cb() from saoninvalidate() and wait for
the callback.
Acquire a reference for devfs in saregister(), and release it
in the new sadevgonecb() routine when all devfs devices for
the particular sa(4) driver instance are gone.
Add a new function, sasetupdev(), to centralize setting
per-instance devfs device parameters instead of repeating the
code in saregister().
Add an open count to the softc, so we know how many
peripheral driver references are a result of open
sessions.
Add the D_TRACKCLOSE flag to the cdevsw flags so
that we get a 1:1 mapping of open to close calls
instead of a N:1 mapping.
This should be a no-op for everything except the
control device, since we don't allow more than one
open on non-control devices.
However, since we do allow multiple opens on the
control device, the combination of the open count
and the D_TRACKCLOSE flag should result in an
accurate peripheral driver reference count, and an
accurate open count.
The accurate open count allows us to release all
peripheral driver references that are the result
of open contexts once we get the callback from devfs.
sys/sys/mtio.h:
Add a number of new mt(4) ioctls and the requisite data
structures. None of the existing interfaces been removed
or changed.
This includes definitions for the following new ioctls:
MTIOCRBLIM /* get block limits */
MTIOCEXTLOCATE /* seek to position */
MTIOCEXTGET /* get tape status */
MTIOCPARAMGET /* get tape params */
MTIOCPARAMSET /* set tape params */
MTIOCSETLIST /* set N params */
usr.bin/mt/Makefile:
mt(1) now depends on libmt, libsbuf and libbsdxml.
usr.bin/mt/mt.1:
Document new mt(1) features and subcommands.
usr.bin/mt/mt.c:
Implement support for mt(1) subcommands that need to
use getopt(3) for their arguments.
Implement a new 'mt status' command to replace the old
'mt status' command. The old status command has been
renamed 'ostatus'.
The new status function uses the MTIOCEXTGET ioctl, and
therefore parses the XML data to determine drive status.
The -x argument to 'mt status' allows the user to dump out
the raw XML reported by the kernel.
The new status display is mostly the same as the old status
display, except that it doesn't print the redundant density
mode information, and it does print the current partition
number and position flags.
Add a new command, 'mt locate', that will supersede the
old 'mt setspos' and 'mt sethpos' commands. 'mt locate'
implements all of the functionality of the MTIOCEXTLOCATE
ioctl, and allows the user to change the logical position
of the tape drive in a number of ways. (Partition,
block number, file number, set mark number, end of data.)
The immediate bit and the explicit address bits are
implemented, but not documented in the man page.
Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
This allows the user to ask the drive to write a filemark
without waiting around for the operation to complete.
Add a new 'mt getdensity' command that gets the XML-based
tape drive density report from the sa(4) driver and displays
it. This uses the SCSI REPORT DENSITY SUPPORT command
to get comprehensive information from the tape drive about
what formats it is able to read and write.
Add a new 'mt protect' command that allows getting and setting
tape drive protection information. The protection information
is a CRC tacked on to the end of every read/write from and to
the tape drive.
Sponsored by: Spectra Logic
MFC after: 1 month
------------------------------------------------------------------------
------------------------------------------------------------------------
r279229 | ken | 2015-02-23 22:43:16 -0700 (Mon, 23 Feb 2015) | 5 lines
Fix printf format warnings on sparc64 and mips.
Sponsored by: Spectra Logic
MFC after: 1 month
------------------------------------------------------------------------
------------------------------------------------------------------------
r279261 | ken | 2015-02-24 21:30:23 -0700 (Tue, 24 Feb 2015) | 23 lines
Fix several problems found by Coverity.
lib/libmt/mtlib.c:
In mt_start_element(), make sure we don't overflow the
cur_sb array. CID 1271325
usr.bin/mt/mt.c:
In main(), bzero the mt_com structure so that we aren't
using any uninitialized stack variables. CID 1271319
In mt_param(), only allow one -s and one -p argument. This
will prevent a memory leak caused by overwriting the
param_name and/or param_value variables. CID 1271320 and
CID 1271322
To make things simpler in mt_param(), make sure there
there is only one exit path for the function. Make sure
the arguments are explicitly freed.
Sponsored by: Spectra Logic
Pointed out by: emaste
MFC after: 1 month
------------------------------------------------------------------------
------------------------------------------------------------------------
r279534 | ken | 2015-03-02 11:09:49 -0700 (Mon, 02 Mar 2015) | 18 lines
Change the sa(4) driver to check for long position support on
SCSI-2 devices.
Some older tape devices claim to be SCSI-2, but actually do support
long position information. (Long position information includes
the current file mark.) For example, the COMPAQ SuperDLT1.
So we now only disable the check on SCSI-1 and older devices.
sys/cam/scsi/scsi_sa.c:
In saregister(), only disable fetching long position
information on SCSI-1 and older drives. Update the
comment to explain why.
Confirmed by: dvl
Sponsored by: Spectra Logic
MFC after: 3 weeks
------------------------------------------------------------------------
------------------------------------------------------------------------
r279570 | ken | 2015-03-03 15:49:07 -0700 (Tue, 03 Mar 2015) | 21 lines
Add density code for DAT-72, and notes on DAT-160.
As it turns out, the density code for DAT-160 (0x48) is the same
as for SDLT220. Since the SDLT values are already in the table,
we will leave them in place.
Thanks to Harald Schmalzbauer for confirming the DAT-72 density code.
lib/libmt/mtlib.c:
Add DAT-72 density code, and commented out DAT-160 density
code. Explain why DAT-160 is commented out. Add notes
explaining where the bpi values for these formats came from.
usr.bin/mt/mt.1:
Add DAT-72 density code, and add a note explaining that
the SDLTTapeI(110) density code (0x48) is the same as
DAT-160.
Sponsored by: Spectra Logic
MFC after: 3 weeks
------------------------------------------------------------------------
------------------------------------------------------------------------
r280230 | ken | 2015-03-18 14:52:34 -0600 (Wed, 18 Mar 2015) | 25 lines
Fix a couple of problems in the sa(4) media type reports.
The only drives I have discovered so far that support medium type
reports are newer HP LTO (LTO-5 and LTO-6) drives. IBM drives
only support the density reports.
sys/cam/scsi/scsi_sa.h:
The number of possible density codes in the medium type
report is 9, not 8. This caused problems parsing all of
the medium type report after this point in the structure.
usr.bin/mt/mt.c:
Run the density codes returned in the medium type report
through denstostring(), just like the primary and secondary
density codes in the density report. This will print the
density code in hex, and give a text description if it
is available.
Thanks to Rudolf Cejka for doing extensive testing with HP LTO drives
and Bacula and discovering these problems.
Tested by: Rudolf Cejka <cejkar at fit.vutbr.cz>
Sponsored by: Spectra Logic
MFC after: 4 days
------------------------------------------------------------------------
------------------------------------------------------------------------
r280231 | ken | 2015-03-18 14:54:54 -0600 (Wed, 18 Mar 2015) | 16 lines
Improve the mt(1) rblim display.
The granularity reported by READ BLOCK LIMITS is an exponent, not a
byte value. So a granularity of 0 means 2^0, or 1 byte. A
granularity of 1 means 2^1, or 2 bytes.
Print out the individual block limits on separate lines to improve
readability and avoid exceeding 80 columns.
usr.bin/mt/mt.c:
Fix and improve the 'mt rblim' output. Add a MT_PLURAL()
macro so we can print "byte" or "bytes" as appropriate.
Sponsored by: Spectra Logic
MFC after: 4 days
------------------------------------------------------------------------
Sponsored by: Spectra Logic
Change ktrdump to use the more standard -M/-N flags to specify the path
to a crash dump and kernel, respectively. The existing -m/-e flags are
still supported for backwards compatiblity but are no longer documented.
Update most userspace consumers of capability.h to use capsicum.h instead.
auditdistd is not updated as I will make the change upstream and then do a
vendor import sometime in the next week or two.
Note that a significant fraction does not apply, as FreeBSD 10 doesn't
contain a Capsicumised ping, casperd, libcasper, etc. When these features
are merged, the capsicum.h change will need to be merged with them.
Sponsored by: Google, Inc.
Add the following options to enable/disable several features in the base system
WITHOUT_BOOTPARAMD - bootparamd
WITHOUT_BOOTPD - bootpd
WITHOUT_FINGER - finger, fingerd
WITHOUT_FTP - ftp, ftpd
WITHOUT_INETD - inetd
WITHOUT_RBOOTD - rbootd
WITHOUT_TCP_WRAPPERS - tcpd, et al
WITHOUT_TFTP - tftp, tftp-server
WITHOUT_TIMED - timed
Sponsored by: EMC / Isilon Storage Division
Fix integer truncation in affecting systat -ifstat
The "systat -ifstat" command was using a u_int to store byte counters.
With a 10Gbps or faster interface, this overflows within the default
5 second refresh period. Switch to using a uint64_t across the board,
which matches the size used for all counters as of r263102.
PR: 182448
MFC after: 1 week
Sponsored by: Sandvine Inc
Improve support for XSAVE with debuggers.
- Dump an NT_X86_XSTATE note if XSAVE is in use. This note is designed
to match what Linux does in that 1) it dumps the entire XSAVE area
including the fxsave state, and 2) it stashes a copy of the current
xsave mask in the unused padding between the fxsave state and the
xstate header at the same location used by Linux.
- Teach readelf() to recognize NT_X86_XSTATE notes.
- Change PT_GET/SETXSTATE to take the entire XSAVE state instead of
only the extra portion. This avoids having to always make two
ptrace() calls to get or set the full XSAVE state.
- Add a PT_GET_XSTATE_INFO which returns the length of the current
XSTATE save area (so the size of the buffer needed for PT_GETXSTATE)
and the current XSAVE mask (%xcr0).
r278603:
Ensure ORGANIZATION_NAME is quoted when ORGANIZATION
could contain strings of two or more words.
r278607:
Reduce number of lines to set ORGANIZATION_NAME in
freebsd-organization.h.
PR: 197540
Sponsored by: The FreeBSD Foundation
r272315
Explicitly return None for negative event indices. Prior to this,
eventat(-1) would return the next-to-last event causing the back button
to cycle back to the end of an event source instead of stopping at the
start.
r272757
Add schedgraph traces for callout handlers. Specifically, a callwheel logs
a running event each time it executes a callout function. The event
includes the function pointer, argument, and whether or not it was run from
hardware interrupt context. The callwheel is marked idle when each handler
completes. This effectively logs the duration of each callout routine in
the graph.
r274091
Bind Ctrl-Q as a global hotkey to exit. Bind Ctrl-W as a hotkey to close
dialogs.
r274902
Add a new thread state "spinning" to schedgraph and add tracepoints at the
start and stop of spinning waits in lock primitives.
Reviewed by: jhb
Add more register values to armreg.h and remove CPU_CONTROL_32BP_ENABLE
from asm.h as they were already defined in armreg.h.
Unify interrupts bit definition and usage. While here remove PSR_C_bit.
r277675:
Add MK_ISCSI knob for building the iscsi initiator, iscsi daemon, kernel
modules, etc
Sponsored by: EMC / Isilon Storage Division
r277726:
Build sbin/iscontrol again if MK_ISCSI != no
Pointyhat to: me
r278070:
Remove duplicate MK_ISCSI block and sort the conditional blocks so this error
won't crop up again in the future
Reported by: gjb
